Keeping Autonomous Mining Moving – Without Wireless Dropouts.

– BlitzFunk for wireless safety connectivity and video streams –

Background

sensmore automates heavy machines and, together with Cemex, has equipped an Aramine L140B loader (LHD) with an automation system at the Rüdersdorf (Germany) limestone works. In autonomous loading cycles, the loader clears the blasted muck from a tunnel system that serves to dewater the limestone quarry above it and therefore has to be continuously extended – advancing by roughly one metre per day. A light grid at the tunnel entrance makes the operation functionally safe: the moment a person enters the area, the loader has to be stopped.

Problem

As it clears material, the loader is constantly on the move through the growing tunnel – and the safety-critical connection has to hold at every position. The wireless link carries the machine’s control and safety data (PROFINET incl. PROFIsafe). If the connection drops even briefly, the loader stops and has to be restarted manually. But since no one is on site during operation, the loader would stand idle until the next shift.

This is exactly where standard Wi-Fi failed: getting the roaming behaviour properly under control proved hopeless. What was needed was a plug-and-play-ready solution without the usual Wi-Fi effort. The environmental conditions make things harder still – 365 days a year, over 99 % humidity at around 14 °C, plus the loader’s vibrations.

And the wireless link had to do more than carry control and safety data: for remote monitoring, it also had to transmit a live video stream. Because the tunnel keeps growing, the radio coverage also had to extend without any replanning – built-in extensibility was a key requirement for sensmore from the outset.

Solution

The decisive difference is BlitzFunk’s guaranteed quality of service, including latency-free roaming: the on-board client stays continuously connected as the loader moves through the tunnel system – without any connection drops that would trigger the emergency stop. Because BlitzFunk is transparent to Ethernet – it behaves like a cable – PROFINET and PROFIsafe could be used without any modification. The same wireless link carries four video streams for remote monitoring instead of the single stream originally planned. Safety, control, and live imagery thus run reliably in parallel.

A total of seven access points are installed along the tunnel system, each with a small switch that forwards the Ethernet signal to the next access point. Each access point covers around 80 m in the tunnel. The tunnel is not one straight line but runs in straight segments with bends between them. The access points at these bends are particularly valuable: from there, they radiate into both adjacent segments at once. Because the tunnel system keeps growing, this easy extensibility pays off especially here: when the route gets longer, another access point is simply installed and added to the channel group – done. Elaborate radio-field planning and any manual roaming programming are eliminated.

For the harsh conditions underground, all housings are rated IP65.

Costs

The installation used seven access points (list price € 1750) and one client (list price € 1100). All access points are powered via Power-over-Ethernet, and the client was connected directly to the loader’s onboard power supply. Every later extension of the tunnel system can be covered cost-effectively with additional access points along the tunnel.

Result

Since 2025, the system has been in productive continuous operation: shift after shift, day after day, the autonomous loader moves tonnes of material – safely and without connection drops across the entire length of the route, even under the extreme conditions of underground mining. Installation succeeded without elaborate radio planning, and the system grows effortlessly with the tunnel system. This makes BlitzFunk the central communication layer for functionally safe automation and remote monitoring in the tunnel.

“Our approach is not to reinvent safety but to build on proven, scalable components – that’s how we get to production so quickly. With BlitzFunk, we no longer have to think about the wireless network, and when the tunnel grows, we simply add another access point.”

Bjarne Johannsen

Bjarne Johannsen CTO, sensmore

 

READ MORE about BlitzFunk or order online here….