Power Supply for DIN rail, 24V / 630mA DC

Power Supply for DIN rail, 24V / 630mA DC

$65.00

15 Watt DIN rail power supply with 1 TE width

Universal LPS power supply with wide range input 100…240V

Manufacturer: Wiesemann & Theis / Country of Origin: Taiwan

SKU:

11080
  • 24V / 0.63A – Power supply for mounting on DIN rails
  • Compact housing cross-section (similar to a circuit breaker)
    • Dimensions: 17.5 x 90 x 54.5 mm
    • allows use of the power supply in building automation control cabinets
  • Flexible in application:
    • Wide range input 100…240V
    • Overvoltage Category III
    • CE Marking and UL Listed
  • High efficiency: typ. 86%
  • Limited Power Source (LPS)
  • Wide operating temperature range: -30,,,+70 deg. Celsius

Standards & more

  • Conforms to standards both in office and industrial environments:
    • High noise resistance per EN 61000-6-2
    • Low noise emission per EN 55032:2015 + A1 Cl. B, EN 61000-3-2 & EN 61000-3-3

Background information:

W&T Web-IOs are often used in larger quantities at a centralized location. In such situations a common power supply for the devices makes the application much more transparent than would be the case if the devices were powered individually.

If no 24V supply is available in the installation, this situation can be handled elegantly and economically using the 15W DIN rail power supply model 11080, which can be used to power several 24V devices from a central location.

The power supply can of course also be used where in addition to the 24V supply for the Web-IO component group power is also needed for supplying the rest of the installation. In this case you only need to ensure that the overall power requirements do not exceed the current capacity of the DIN rail power supply.

  • Output power:
    • max. 15W
  • Efficiency:
    • typ. 86%
  • Input voltage:
    • 85…264V AC
  • Frequency:
    • 47…63 Hz
  • Input current:
    • 0.25A at 230V AC
  • Inrush:
    • max. 45A at 230V AC
  • No-load losses:
    • <0.3W
  • Overvoltage Category:
    • III
  • LPS
    • Yes
  • Output voltage:
    • 24V DC (adjustable 21.6…29V)
  • Tolerance:
    • +/-1%
  • Ripple:
    • max. 150mV
  • Rated current:
    • 0.63A
  • Minimum load:
    • none
  • Overcurrent limiter:
    • at 110%…145% of rated current
  • Short circuit protected:
    • Yes
  • Overvoltage protection:
    • Shutdown at 30…36V
    • Reset using POWER ON
  • Start time:
    • 2000ms at rated load and 230V AC
  • Rise time:
    • 80ms at rated load and 230V AC
  • Voltage bridging:
    • 30ms at nominal load and 230V AC
  • Cooling:
    • Convection cooling
  • Dielectric strength:
    • In-Out: 3KV AC
  • Isolation resistance:
    • In-Out: 100 MOhm at 500VDC
  • Operating temperature:
    • -30…+70°C, power reduction
    • from 50…70°C
  • Storage temperature:
    • -40…+85°C
  • Relative humidity:
    • Operating: 20…90% relative humidity
    • Storage: 10…95% relative humidity
    • (non-condensing)
  • Connections:
    • 2-pin input, 2-pin output
    • with screw terminals
  • MTBF:
    • >1,160,000 hours (as per MIL-HDBK-217F at 25° C)
  • Merchandise:
    • 2-year manufacturer’s guarantee
  • Weight:
    • 78 g
  • Dimensions:
    • 17.5 x 90 x 54.5 mm
  • Approvals:
    • UL, c-UL, TÜV, CB, CE
  • Safety:
    • Meets
    • EN 61558-1, EN 61558-2-16
    • EN 62368-1
  • EMC:
    • Meets
    • EN 55032 B
    • EN 61000-3-2, EN 61000-3-3
    • EN 61000-4-2, EN 61000-4-3
    • EN 61000-4-4, EN 61000-4-5
    • EN 61000-4-6, EN 61000-4-8
    • EN 61000-4-11
  • Manufacturer:
    • MEAN WELL Enterprises Co., Ltd.
  • Power supply type:
    • HDR-15-24

 

 

ACCESSORIES  / MANUAL  / ADDITIONAL DIN RAIL POWER SUPPLIES

Related

RS485-DB9 Adapter

$58.00

Power Supply for DIN rail, 24V / 630mA DC

$65.00

BlitzFunk Client (inkl. Antennas)

$2,075.00

BlitzFunk Access Point (inkl. Antennas)

$3,290.00